Rivet Click

• Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
• Material: plastic equipped with scratch-proof polyamide fibres.
• Installation: one-time mounting of the base part, replaceable glide foot.
• Glide surface: ⌀25 mm
• Furniture height: furniture is raised by a maximum of 12 mm.

The Rivet Click must be positioned level with the floor. Please contact us if the base of your furniture’s tubular legs or frame is not standing on the ground flatly.

Please note that our glides require occasional maintenance.

Please follow the steps below in order to mount the Rivet Click:

• Remove the current plug from the hole in the base of the chair leg or frame, if present.
• If the hole diameter is smaller than 6 mm, it must be bored to this diameter.
• Insert the expanding shaft of the base part into the hole as far as possible.
• Push the drive pin through until it is flush with the base part, causing the rivet to expand in the hole, locking the base part firmly into place.
• Click the glide foot onto the base part until it locks into place.