Chairfixx

• Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
• Material: plastic equipped with scratch-proof polyamide fibres.
• Installation: replaceable clamp shell glide.
• Furniture height: furniture is raised by 7–10 mm.Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
• Material: plastic equipped with scratch-proof polyamide fibres.
• Installation: replaceable clamp shell glide.
• Furniture height: furniture is raised by 7–10 mm.

The pin of the Chairfixx has a width of 5 to 6 mm. Always watch or read the instructions before assembling the Chairfixx.

We recommend using at least 4 pieces of the Chairfixx per chair. When you have a rough floor or particularly heavy chairs, use 5 or 6 Chairfixx per chair.

Please note that our glides require occasional maintenance.

The Chairfixx consists of one part only and has no replaceable glide foot.

Remove the original glides before mounting the Chairfixx.

Place the Chairfixx at an equal height on both sides in order to distribute the pressure evenly.

Do not place the Chairfixx at the very end of the cantilever tube, but a few centimetres back. This prevents the chair from tilting easily.

Mounting with pin: Preferably mount the Chairfixx with a pin. The pin has a max. diameter of 6 mm. If there are no holes in the tube, you can choose to pre-drill them. If the hole is smaller than 5 mm, you can drill a larger hole.

Mounting without pin: without pin, we recommend using double-sided tape to prevent the Chairfixx from shifting.

When sliding the chair, make sure the chair does not tilt to prevent the hard plastic shell from touching and potentially damaging the floor.